The selection, installation, and maintenance of cantilever beam sensors significantly impact their measurement accuracy and lifespan. When selecting a sensor, the range should be chosen based on the project's maximum load, and a 30% safety margin is recommended to avoid overload damage. For dynamic load scenarios, the sensor's fatigue life must be considered. The accuracy class should be selected according to application requirements, such as OIML Class C or D. Accuracy is typically characterized by parameters such as nonlinearity and hysteresis error. For laboratory projects, a 0.05%FS high-precision sensor can be used, while 0.5%FS is sufficient for industrial applications. Environmental factors such as humidity, dust, corrosion, and temperature must be considered when selecting the protection level, such as IP65 or IP67, as well as the material, such as alloy steel or stainless steel. Special materials are required for high-temperature environments (>150 องศา) และควรใช้สแตนเลสที่มีการเคลือบในสภาพแวดล้อมที่มีการกัดกร่อนสูง
สามารถเลือกวิธีการติดตั้งได้ตามความต้องการของโครงการ เช่น รูวางตำแหน่งแบบขั้น ข้อต่อแบบถอดได้ หรืออินเทอร์เฟซแบบเกลียว สัญญาณเอาท์พุตจะต้องเข้ากันได้กับระบบการรับข้อมูล สัญญาณอะนาล็อกมีความสามารถในการป้องกันการรบกวนที่แข็งแกร่ง ในขณะที่สัญญาณดิจิตอลเหมาะสำหรับการส่งสัญญาณระยะไกล สำหรับการเชื่อมต่อกับคอมพิวเตอร์หรือ PLC สามารถเลือกเซนเซอร์ดิจิทัลที่มีตัวแปลงอนาล็อกเป็นดิจิทัลในตัวได้ เพื่อชดเชยการโหลดที่ไม่อยู่ตรงกลางระหว่างการติดตั้ง แนะนำให้ใช้เซ็นเซอร์ที่มีส่วนประกอบการส่งผ่านแรงลูกเหล็กในตัวหรือโครงสร้างหัวลูกปืนคู่ เซ็นเซอร์เหล่านี้กำจัดข้อผิดพลาดในการโหลดที่ไม่อยู่ตรงกลางผ่านร่องลูกปืนและระบบสปริง ทำให้การติดตั้งและการแก้ไขจุดบกพร่องทำได้ง่ายขึ้น
